FEATURED ROOM
Mollo Wall Lamp
SKU LSW-EV5623-02
A sea-glass pebble, lit from within.
Illuminate your space with the ethereal charm of the Mollo Wall Lamp. A standout piece that blends organic curves with post-modern flair, this sconce is defined by its high-quality resin body that mimics the translucent, dewy look of sea glass or polished jade. When lit, the Mollo sconce transforms light into a soft, diffused glow, creating a serene and inviting atmosphere. Whether styled as a singular accent or in a symmetrical pair, it brings a touch of "functional art" to your walls.
Two Configurations
A solo pebble or a pair
Single
The Solo
L 5.9″ × W 3.5″ × H 5.9″
L 15 × W 9 × H 15 CM
Double
The Twin
L 5.9″ × W 3.5″ × H 10″
L 15 × W 9 × H 25.5 CM
The Make
Two honest materials
Iron
A solid iron back-plate anchors the lamp flush to the wall — quietly engineered, hidden once installed.
Resin
High-quality resin is cast into the dewy, translucent body — the look of sea glass and polished jade, soft to the eye when lit.
Finishes
Red White Light Green
The Particulars
Full specification
Materials
Iron · Resin
Finishes
Red · White · Light Green
Lampshade
White
Bulb Base
G9 — bulb not included
Voltage
AC 110 – 240 V
Wiring
Hardwired
Sizes
L 5.9″ × W 5.9″ × H 3.5″ (15 × 15 × 9 cm) — 1 light
L 5.9″ × W 10″ × H 3.5″ (15 × 25.5 × 9 cm) — 2 lights
L 5.9″ × W 10″ × H 3.5″ (15 × 25.5 × 9 cm) — 2 lights
Suited For
Bedside · Hallways · Powder Rooms · Living Rooms · Stairwell Landings
Certification
North America Europe Australia Saudi Arabia
Good to know
Bulb sold separately — fits a standard G9 base bulb, warm-white LED recommended for the softest sea-glass glow. Hardwired install by a qualified electrician onto a standard junction box. Indoor placement only — keep away from direct water contact.
Frequently Asked
Before you order
What bulb best brings out the sea-glass glow?
The Mollo takes a standard G9 base bulb — one for the Solo, two for the Twin — sold separately. For the dewy, "lit-from-within" effect described in the product story, we recommend a frosted warm-white LED at 2700K, around 25 – 40 W equivalent. Frosted is essential — clear filament bulbs create visible hot spots through the translucent resin and break the polished-jade illusion. Stay below 40 W equivalent so the resin stays cool and even.
How does each finish read when lit?
Each finish transforms differently once the bulb is on — that's part of the Mollo's appeal. Light Green reads most like polished jade, with the warmest sea-glass softness. White diffuses to an almost milk-glass calm, perfect over a vanity or in a hallway. Red is the boldest — unlit it reads as a deep coral-pebble accent, lit it warms into a rich amber glow. Pick the unlit colour you want by day; the lit personality is a quiet bonus.
How is the Mollo installed?
Hardwired onto a standard junction box, by a qualified electrician. Four steps:
- Cut power & confirm wiring. Switch off the circuit at your breaker; confirm wall-box wiring is grounded and that supply matches AC 110 – 240 V.
- Mount the iron back-plate. Secure the back-plate to a standard junction box. The plate sits flush against the wall — no specialty hardware required.
- Connect & seat the resin body. Match line-to-line, neutral-to-neutral, and ground. Tuck connections, seat the resin pebble against the back-plate, and tighten.
- Fit the bulb. Thread in your G9 bulb (or two, for the Twin) and restore power. The pebble should glow evenly across its full surface.
How should I plan placement and pair the two sizes?
The Mollo reads best at roughly eye level when seated — about 140 – 160 cm from the floor in a living room, or framing a bathroom mirror at 165 – 175 cm. The Solo and Twin share the same width and depth, so they pair beautifully: two Solos flanking a vanity for symmetrical light, or a Twin above a console with a Solo on the adjacent wall for an asymmetric, gallery-style composition. Stick to one finish for cohesion; mix only when you want a deliberate, curated look.
How do I clean the resin body?
Resin is more sensitive than glass — treat it gently. Wipe with a dry, soft microfibre cloth to lift dust. For fingerprints, a barely-damp cloth with plain water is enough, followed by a dry buff. Never use alcohol, solvents, citrus cleaners, or abrasive polishes — these will dull or cloud the polished-jade surface permanently. Always switch off and let the lamp cool fully before cleaning.
For Trade & Specifiers