No results found

Try a different term or browse our collections

Home / Productos / Fallon Wall Lamp

Fallon Wall Lamp

SKU LSW-260506-01
$162.00

Two columns of light, drawn in clean geometry.

The Fallon Wall Lamp redefines interior lighting with its clean, geometric lines. Combining a robust iron frame with high-transparency acrylic shades, this sconce features built-in integrated LED technology to provide even, soft, and flicker-free illumination. The signature dual-column design not only increases the luminous area but also creates an architectural sense of depth on your walls — the perfect finishing touch for bedside lighting, hallways, or living room accent walls.

Two Lengths

Choose your scale

Compact

The Short

L 15.7″ × W 4.7″
L 40 × W 12 CM
Statement

The Long

L 23.6″ × W 4.7″
L 60 × W 12 CM

The Make

Three engineered elements

Iron

Robust iron frame in dual-column geometry — engineered for an architectural sense of depth on the wall.

Acrylic

High-transparency white acrylic shades — diffuse the LED into an even, soft column of light.

Integrated LED

Built-in LED module — flicker-free, energy-efficient, and tuned for an even wash with no visible bulb.

Finishes
Water-Transfer Wood Grain White
A note on the wood-grain finish

The wood-grain option is a water-transfer printing process built on nano-scale technology — applying the texture and tone of natural timber directly onto the iron frame. The result reads like wood at any distance but performs like metal: fireproof, moisture-resistant, and crack-proof. It holds its appearance in humid environments — bathrooms, vanities, coastal interiors — without the rotting, warping, or upkeep of a real veneer.

The Particulars

Full specification

Materials
Iron · Acrylic
Finishes
Water-Transfer Wood Grain · White
Lampshade
White Acrylic — high-transparency, flicker-free diffusion
Light Source
Built-in integrated LED — module not user-replaceable
Voltage
AC 110 – 240 V
Wiring
Hardwired
Dimensions
Short: L 15.7″ × W 4.7″ (L 40 × W 12 cm)
Long: L 23.6″ × W 4.7″ (L 60 × W 12 cm)
Suited For
Bedsides · Hallways · Living Room Accent Walls · Stairwells · Powder Rooms
Certification
North America Europe Australia Saudi Arabia
Good to know

Integrated LED — the light source is built in, so there is no bulb to source or replace. Hardwired install by a qualified electrician; rated for indoor placement, away from direct water contact.

Frequently Asked

Before you order

Should I choose the 40 cm or the 60 cm version?
It depends on the wall the fixture has to hold. The 40 cm Short reads as a balanced bedside companion — installed in pairs flanking a headboard, or framing a powder-room mirror. The 60 cm Long earns its name as a statement piece: a single fixture along a hallway, above a console, or as the lit anchor of a living-room accent wall. As a general rule, if the wall is wider than 1.8 m, the long version will hold the space better.
The LED is built-in — what happens when it eventually wears out?
The integrated LED module is rated for 30,000 – 50,000 hours — roughly 15 to 25 years of typical residential use. Because it is built into the fixture rather than a replaceable bulb, the trade-off is genuine: the light source itself is engineered into the geometry, which is what allows the even wash and the seamless dual-column design. When the module eventually reaches end-of-life, the fixture is replaced rather than re-lamped.
Is the Fallon dimmable?
Yes — the integrated LED driver is compatible with most modern wall dimmers. For best results, pair it with a TRIAC or 0–10 V dimmer rated for LED loads; older incandescent dimmers may flicker or buzz. If a smooth, candlelight-low dim is important to you, mention it at order — we'll confirm dimmer compatibility for your wiring.
How does the wood-grain finish hold up over time?
The water-transfer print is bonded into the iron at a nano-scale and sealed — it does not peel, crack, or fade the way a veneer or wrap would. It is fireproof, moisture-resistant, and crack-proof, which is why it can sit comfortably in a bathroom or coastal interior where a real wood finish would warp. Wipe with a soft, dry cloth; for occasional cleaning, a barely damp cloth is fine — avoid solvents and abrasives.
Does it require an electrician, and does it work outside North America?
Yes to the first — the Fallon is hardwired onto a standard wall junction box, so a qualified electrician will mount the back plate, connect line / neutral / ground, and seat the fixture. And yes to the second — it is certified for North America, Europe, Australia, and Saudi Arabia, and accepts AC 110 – 240 V universal voltage.

For Trade & Specifiers

Downloads & resources

Specifications PDF · Spec Sheet Installation PDF · Install Guide 3D Files For Specifiers
Volver arriba